| AcquiSuite Overview: | The Complete Energy Data Acquisition System |
| Home | Products | Documentation | About Obvius | Contact Us |
The AcquiSuite brings "plug and play" capability to the data acquisition market, dramatically reducing the time and training to put a typical building on line. In most applications, the installation can be done by the building engineer or contractor in less than 2 hours. The system automatically detects and configures Modbus devices in just seconds reducing installation time and cost. Because the AcquiSuite automatically detects modbus devices, the installer does not need to enter modbus point numbers or multipliers and thereby reduces configuration errors.
After installation, data from the connected modbus devices is time stamped and stored in non volatile memory at user selected intervals. This interval data is stored at the local site until the next scheduled upload to the SQL database server. Using the built-in modem or Ethernet port, data is sent via ether the network or phone lines to the Building Manager Online server, or collected by your own data warehousing system. From the Building Manager Online website, you can view past data, plot charts, and export data for use on your own PC. Remote configuration is also provided at the BMO website to allow administration of AcquiSuite devices that are on intermittent or shared dialup telephone lines.
Applications:
Note: the A8811 has been discontinued, and replaced by the A8812 AcquiSuite
Product documentation:
|
![]() AcquiSuite A8801-1 |
20811 N.W. Cornell Road #700, Hillsboro, OR 97124 Ph: +1-503-601-2099 Toll Free +1-866-204-8134 Copyright © 2001-2004 Obvius, All rights reserved. |
$Date: 2007/11/12 15:36:00 $ $Revision: 1.15 $ Contact Us |